// JavaScript Document

/***********************************************
* Bookmark site script- © Dynamic Drive DHTML code library (www.dynamicdrive.com)
* This notice MUST stay intact for legal use
* Visit Dynamic Drive at http://www.dynamicdrive.com/ for full source code
***********************************************/

/* Modified to support Opera */
function bookmarksite(title,url){
if (window.sidebar) // firefox
	window.sidebar.addPanel(title, url, "");
else if(window.opera && window.print){ // opera
	var elem = document.createElement('a');
	elem.setAttribute('href',url);
	elem.setAttribute('title',title);
	elem.setAttribute('rel','sidebar');
	elem.click();
} 
else if(document.all)// ie
	window.external.AddFavorite(url, title);
}

/**************************************************/
// in SiteActivity.cfm, show or hide summary statistics
function onClickStats(tcMode, tcRoot) {
	if (tcMode == "show") {
		location = tcRoot + "?pg=admin/SiteActivity&stats=show"
	} else {
		location = tcRoot + "?pg=admin/SiteActivity&stats=hide"
	}
}

/**************************************************/
// in SiteActivity.cfm, show or hide summary statistics
function onClickSource(tcMode, tcRoot) {
	if (tcMode == "show") {
		location = tcRoot + "?pg=admin/SiteActivity&source=show"
	} else {
		location = tcRoot + "?pg=admin/SiteActivity&source=hide"
	}
}

/**************************************************/
// from site http://www.polariscomputing.com/isbn.htm; has many language versions for
// converting 10 to 13 or 13 to 10
function BtnConvert_onclick() {
  var i = 0;
  var v = 0;
  var n = 0;
  var c = "";
  var Result = "";
  var s12 = "";
  var ISBN10 = document.FrmConv.TxtISBN10.value;
  var len = ISBN10.length;
  if (len<9 || len>10) Result = "ERROR";
  else {
    s12 = "978" + ISBN10.substring(0, 9);
    for (i=0; i<12; i++) {
      if (Result=="") {
        c = s12.charAt(i);
        if (c>="0" && c<="9") {
          v = c - 0;
          if ((i % 2)!=0) v = 3 * v;
          n = n + v; 
        }
        else Result = "ERROR"  
      }
    }
    if (Result=="") {
      n = n % 10;
      if (n!=0) n = 10 - n;
      Result = s12 + n; 
    }
  }
  document.FrmConv.TxtISBN13.value = Result;
}

/**************************************************/
var toWindow;
function doFirstAppeared() {
	if (typeof toWindow == "object") {
		toWindow.close()
	}
	
	toWindow = window.open("firstappeared/", "FirstAppeared", "width=550,height=570,left=50,top=20,scrollbars=yes,resizable=yes")
}

/**************************************************/
var toWindow;
function doPrivacyPolicy() {
	if (typeof toWindow == "object") {
		toWindow.close()
	}
	
	toWindow = window.open("privacypolicy/", "PrivacyPolicy", "width=400,height=500,left=50,top=50,scrollbars=yes,resizable=yes")
}

/**************************************************/
function doTermsOfUse() {
	if (typeof toWindow == "object") {
		toWindow.close()
	}
	
	toWindow = window.open("termsofuse/", "TermsOfUse", "width=725,height=525,left=10,top=10,scrollbars=yes,resizable=yes")
}

/**************************************************/
function doVolunteer() {
	if (typeof toWindow == "object") {
		toWindow.close()
	}
	
	toWindow = window.open("volunteer/", "Volunteer", "width=500,height=375,left=50,top=50,scrollbars=yes,resizable=yes")
}

/**************************************************/
<!-- The JavaScript Source!! http://javascript.internet.com -->

<!-- Begin
function emailCheck (emailStr) {
/* The following pattern is used to check if the entered e-mail address
   fits the user@domain format.  It also is used to separate the username
   from the domain. */
var emailPat=/^(.+)@(.+)$/
/* The following string represents the pattern for matching all special
   characters.  We don't want to allow special characters in the address. 
   These characters include ( ) < > @ , ; : \ " . [ ]    */
var specialChars="\\(\\)<>@,;:\\\\\\\"\\.\\[\\]"
/* The following string represents the range of characters allowed in a 
   username or domainname.  It really states which chars aren't allowed. */
var validChars="\[^\\s" + specialChars + "\]"
/* The following pattern applies if the "user" is a quoted string (in
   which case, there are no rules about which characters are allowed
   and which aren't; anything goes).  E.g. "jiminy cricket"@disney.com
   is a legal e-mail address. */
var quotedUser="(\"[^\"]*\")"
/* The following pattern applies for domains that are IP addresses,
   rather than symbolic names.  E.g. joe@[123.124.233.4] is a legal
   e-mail address. NOTE: The square brackets are required. */
var ipDomainPat=/^\[(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})\]$/
/* The following string represents an atom (basically a series of
   non-special characters.) */
var atom=validChars + '+'
/* The following string represents one word in the typical username.
   For example, in john.doe@somewhere.com, john and doe are words.
   Basically, a word is either an atom or quoted string. */
var word="(" + atom + "|" + quotedUser + ")"
// The following pattern describes the structure of the user
var userPat=new RegExp("^" + word + "(\\." + word + ")*$")
/* The following pattern describes the structure of a normal symbolic
   domain, as opposed to ipDomainPat, shown above. */
var domainPat=new RegExp("^" + atom + "(\\." + atom +")*$")

/* Finally, let's start trying to figure out if the supplied address is
   valid. */

/* Begin with the coarse pattern to simply break up user@domain into
   different pieces that are easy to analyze. */
var matchArray=emailStr.match(emailPat)
if (matchArray==null) {
  /* Too many/few @'s or something; basically, this address doesn't
     even fit the general mould of a valid e-mail address. */
	alert("The email address format seems incorrect (check @ and .'s)")
	return false
}
var user=matchArray[1]
var domain=matchArray[2]

// See if "user" is valid 
if (user.match(userPat)==null) {
    // user is not valid
    alert("The email address's user name (the first part of the address) doesn't seem to be valid.")
    return false
}

/* if the e-mail address is at an IP address (as opposed to a symbolic
   host name) make sure the IP address is valid. */
var IPArray=domain.match(ipDomainPat)
if (IPArray!=null) {
    // this is an IP address
	  for (var i=1;i<=4;i++) {
	    if (IPArray[i]>255) {
	        alert("The email address's destination IP address is invalid!")
		return false
	    }
    }
    return true
}

// Domain is symbolic name
var domainArray=domain.match(domainPat)
if (domainArray==null) {
	alert("The email address's domain name (the second part of the address) doesn't seem to be valid.")
    return false
}

/* domain name seems valid, but now make sure that it ends in a
   three-letter word (like com, edu, gov) or a two-letter word,
   representing country (uk, nl), and that there's a hostname preceding 
   the domain or country. */

/* Now we need to break up the domain to get a count of how many atoms
   it consists of. */
var atomPat=new RegExp(atom,"g")
var domArr=domain.match(atomPat)
var len=domArr.length
if (domArr[domArr.length-1].length<2 || 
    domArr[domArr.length-1].length>3) {
   // the address must end in a two letter or three letter word.
   alert("The email address must end in a three-letter domain, or a two letter country.")
   return false
}

// Make sure there's a host name preceding the domain.
if (len < 2) {
   var errStr="This email address is missing a hostname (the second part of the address)"
   alert(errStr)
   return false
}

// If we've gotten this far, everything's valid!
return true;
}
//  End -->

/**************************************************/
function notYet(tcWhen) {
	if (typeof toWindow == "object") {
		toWindow.close()
	}
	if (typeof tcWhen == "null")
	  tcWhen = ""
	
	toWindow = window.open("NotYet.cfm?when=" + tcWhen, "NotYetReady", "width=350,height=100,left=50,top=50,scrollbars=no,resizable=yes")
}

var oRAAWindowHandle;
function reviewAndApproval(tnLevel) {
	if (typeof oRAAWindowHandle == "object" && oRAAWindowHandle != null)
		oRAAWindowHandle.close();
	
  if (typeof tnLevel == "number" && tnLevel > 1)
	  tcPrefix = "../"
	else
	  tcPrefix = ""

oRAAWindowHandle = window.open(tcPrefix + "ReviewAndApproval/?window=t", "ReviewAndApproval", "width=450,height=400,left=250,top=50,scrollbars=yes,resizable=yes");
}